"ISIS SP" Porcelain

CANYON STATE DENTAL SUPPLY
800-354-3684

Serving the Dental Lab Industry since 1988 Providing Quality
Dental Lab Equipment and Supplies!
COMPARE and SAVE!

ISIS SP PORCELAIN

Canyon State Dental Supply is proud to present

ISIS SP PORCELAIN

"ISIS™ SP Porcelain" is a complete system for all your PFM restorations and veneers! "ISIS™ SP Porcelain System" brings you an unsurpassed combination of Quality, Esthetics, and Competitive Pricing. We believe this combination equals Superb Value!

"ISIS™ SP Porcelain" is distributed Exclusively through members of the IDLDA (Independent Dental Lab Dealers Association). This group represents small dealers across the USA that brings to the table years of knowledge, experience, integrity, and support, to help you succeed and grow your business. These are the Dealers that have been there with you for years helping you to grow and expand your business. IDLDA members are small businessmen like yourself, and will help you to succeed in YOUR business.

"ISIS™ SP Porcelain" is suitable for technicians of all skill levels from beginner to Master technician. It is compatible with a wide range of alloys with a CTE of 13.6 to 15.1.

"ISIS™ SP Porcelain" has better handling characteristics over the conventional porcelains on the market (Compare to Ceramco™ or Synspar®). There is true shade fidelity, matching the shade guide the first time!

"ISIS™ SP Porcelain" is more of the European rather than the USA design, although it is manufactured in the USA!

"ISIS™ SP Porcelain" includes a wide range of powders for highly esthetic restorations (Body, Opaceous Body, Opaque (powder or paste), Body/Incisal/Special Modifiers, Incisals, Opal Incisals, Margin, Add-On, and Stains & Liquids).

"ISIS™ SP Porcelain" is available in a wide range of shades including Classic Vita Lumin™ (16 shades A-1 to D-4); 3D Master Shades™ (26 VCH shades); and Bleached Shades (5 shades; AO, BO, SuperBleach, AOO, BOO).

Call TODAY to begin experiencing "ISIS™ SP Porcelain" for yourself! Trial kits are available by calling 1-800-354-3684.


Order 10 bottles & Receive 1 bottle FREE! (10 +1 Internet orders only! Equal or lesser value)

Body, Opaque Powder, Incisals, Opaceous Body, $19.95/oz.	Opal Incisals $33.95/oz.	Opaque Paste $16.95/ 4 gram jar

Margin Porcelain

$13.95/ 10 gram jar

Opaque Modifiers

$14.95/ 15 gram jar

Body/Incisal Modifiers

$13.95/ 12 gram jar

Add-Ons

$14.95/ 15 gram jar

Canyon State Dental Supply - Order Form

CLICK ON THE LINK ABOVE FOR OUR ORDER FORM!

623-979-9737 800-354-3684 fax 623-582-2363

ISIS SP PORCELAIN

Product Chart

Canyon State Dental Supply - Order Form

CLICK ON THE LINK ABOVE FOR OUR ORDER FORM!

ISIS SP PORCELAIN FIRING CHART

Please note that the firing parameters are recommended starting parameters and may need to be adjusted due to variations from furnace to furnace, It is recommended that you adjust the high temperature and leave all other parameters the same. Adjust the vacuum release temperature accordingly if the temperature is changed.

Parameters	Powder & Paste Opaque	Margin	Body/Incisal	Natural Glaze	"ISIS" Porcelain Glaze	**Add-on
Low Temp (T1)	1000°F (540°C)	1000°F (540°C)	1000°F (540◦C)	1000°F (540°C)	800°F (427°C)	1000°F (540°C)
Pre-Dry Time	6 Minutes (6-8 Min. for Paste)	6 Minutes	6 Minutes	6 Minutes	6 Minutes	6 Minutes
Rate	*100°F/min (55°C/min)	*100°F/min (55°C/min)	*100°F/min (55°C/min)	*100°F/min (55°C/min)	*100◦-125°F/min (55-70°C/min)	*100°F/min (55°C/min)
Vacuum Level	≥28°/710mm	≥28°/710mm	≥28°/710mm	0	Optional ≥28°/710mm	Optional ≥28°/710mm
Vacuum Start	1000°F (540°C)	1000°F (540°C)	1000°F (540°C)	N/A	Optional 900°F (480◦C)	Optional 1000°F (540◦C)
Vacuum Release	1730°F/min (943°C/min)	1700°F/min (927°C/min)	1670°F/min (910°C/min)	N/A	Optional 50°F (28°C) below high temp.	Optional 100°F (55°C) below high temp.
High Temp (T2)	1830°F/min (1000°C/min)	1800°F/min (982°C/min)	1770°F/min (965°C/min)	1720°F/min (940°C/min)	1400-1700°F/min (760-927°C/min)	1680°F/min (915°C/min)
Hold	0 minutes	0 minutes	0 minutes	0 minutes	0 minutes	0 minutes
Cool Time	1 minutes	1 minutes	1 minutes	1 minutes	1 minutes	1 minutes

*A starting rate of 100°F/minute (55°C) is recommended for powder porcelain. If an ideal appearance is not achieved the rate may be reduced by up to 25°F/min (13°C/min) to correct for a white or milky appearance.

**Add-On porcelain is intended for making small corrections to finished restorations. Vacuum is optional for Add-On porcelain. Shades are accurate without vacuum, but translucency of incisal Add-On is increased with vacuum.

ISIS SP PORCELAIN SHADE COORDINATION CHART

Shade	Opal Incisal	Incisal
A1	IN-30	IN-30
A2	IN-30	IN-30
A3	IN-15	IN-20
A3.5	IN-25	IN-20
A4	IN-GR	IN-DG
B1	IN-30	IN-30
B2	IN-25	IN-30
B3	IN-25	IN-20
B4	IN-15	IN-20
C1	IN-GR	IN-GR
C2	IN-GR	IN-GR

Shade	Opal Incisal	Incisal
C3	IN-DG	IN-GR
C4	IN-DG	IN-DG
D2	IN-GR or IN-15	IN-GR
D3	IN-DG or IN-OR	IN-GR
D4	IN-GR	IN-GR
AOO	IN-40	IN-40
AO	IN-40	IN-40
BOO	IN-40	IN-40
BO	IN-40	IN-40
SB	IN-40	IN-40

Canyon State Dental Supply - Order Form

CLICK ON THE LINK ABOVE FOR OUR ORDER FORM!


	ISIS SP PORCELAIN INSTRUCTIONS

é Return to top

Thank you for viewing our website!! Please call if you have any questions about any products you have seen here!
1-800-354-3684		623-979-9737

Send mail to: steve@canyonstatedentalsupply.com for information, sales,
questions or comments about this web site.

Hit Counter

Last modified: 12/31/11